fbpx

Value Workshop Shed

Value Workshop Shed

In stock (can be backordered)

From: $1,893.75

Clear

The Amish made Value Workshop Shed is perfect for general storage or a variety of other purposes. the floor has 2" x 4" joists 16" on center and uses 5/8" thick OSB flooring. Also, the sidewall studs are on 2' centers and are covered with 3/8" Smart Panel siding. With double doors on the end wall, the Value Workshop Shed is a traditional shed design perfectly suited for storing lawn tractors and other equipment. Side-walls come standard at 6' tall on our Value Workshop Shed, which means you'll have the headroom you need, regardless of your height.

The Wood Value Shed Workshop comes standard double doors and working windows.

Pre-Cut Kits: The Shed comes with all wood pre-cut to exact lengths. You must assemble the pieces into sections and then put the sections together. Recommended for experienced users. All hardware and screws are included.

There is a 2" overhang on the Value Sheds. Kits are pre-cut, primed, labeled and ready for paint. You will only need basic carpentry skills and a few basic tools.

Value Workshop Shed Includes:
* Double doors
* 24" on center 2 x 4 framing for walls
* 24" on center 2 x 4 trusses
* SmartSide siding with a 5 year 50 warranty
* Kit will be primed and ready for paint
* High quality manufactured trim
* The first number of the building size is the truss size (ex. 8 x 10 building the truss is 8' wide)
* Aluminum trim
* All pieces pre-cut and ready to assemble
* Swivel door handle latch
* All nails & screws included

Customer provides:
* Shingles
* Drip Edge
* Paint
* Floor (if building is not purchased with floor kit

Additional information

Weight 0.0 kg
Dimensions 0.0 × 0.0 × 0.0 cm
Size

10 x 10, 10 x 12, 10 x 14, 10 x 16, 10 x 18, 10 x 20, 12 x 12, 12 x 14, 12 x 16, 12 x 18, 12 x 20, 12 x 24, 8 x 10, 8 x 12, 8 x 14, 8 x 16, 8 x 8

Floor Kit

Pre-cut Kit (wood) No Floor, DIY Floor Kit

Site Preparation

cottage kit site preparation

Mark the area, giving yourself an additional 12″ on each side of your building

storage shed kit site preparation

Make sure the area is level

playhouse kit site preparation

Fill site with desired foundation material (crushed stone shown)

CRUSHED STONE

We recommend using crushed stone approximately 4-5″ deep. We also advise that you have 12″ of stone around the perimeter of the outbuilding to control weeds and keep moisture away from the building. Before installing the stone, you can either dig out 4″ of soil and simply make the stone ground level, or you can make the frame with 4x4s or landscape timbers and then fill flush to the top with stone.

CONCRETE PAD

Another option would be to have a concrete pad installed. If you are going to have a concrete pad installed, remember to keep the pad as close to ground level as possible. We recommend that you make the pad 12″ wider on each side of the building. Using crushed stone or a concrete pad will increase the longevity of your building/playhouse. Having the proper site allows needed airflow, which will keep your building/playhouse looking great for years to come!

PERMITS

If it is necessary to obtain a building permit or cross a neighboring property, it is the buyer’s responsibility to obtain a neighbor’s permission or to purchase the necessary permits prior to delivery.

Delivery Info

A liftgate delivery is available on models 8×12 or smaller. Larger models can be hand-unloaded off the truck panel by panel.